Everything in Facade and roof repair
Facade and roof repair eliminates leaks and wall cracks
Dry ceilings without rainwater stains
Cracked roof tiles and decayed ridge seals let water penetrate ceilings during autumn storms. Replaced tiles and bonded mortar beds keep downpours outside, preventing damp patches on indoor plaster.
Uniform render without hollow cracks
Heat and coastal air loosen render from the brickwork underneath. Taking away loose patches and putting on fresh breathable render leaves a smooth, even wall.
Sealed perimeter flashings around terraces
Strong sun breaks down joint seals along parapet walls and terrace edges. New seals keep water out before it can soak into walls and concrete slabs.
Systematic repair steps for roofs and facades
A hammer test locates hollow render — A light hammer tap reveals hidden air pockets behind loose wall plaster. Loose sections fall away cleanly to expose solid brickwork.
Chisels remove damaged mortar and cracked tiles — We cut out crumbling pointing and fractured terracotta tiles using hand chisels. Sound sections remain intact while damaged materials leave the roof.
Clean water clears dust from exposed surfaces — Rinsing the exposed wall clears away fine dust and salt so new mortar bonds tight.
Breathable mortar patches damaged wall sections — New breathable mortar fills every cracked area flush with the wall and lets moisture escape freely.
Flexible sealant bridges terrace and roof joints — We seal gaps along roof flashings, parapet walls, and tile overlaps with polymer sealant. The seal expands and contracts under intense summer heat without splitting.
Protective coating shields the repaired surface — We apply a breathable exterior paint over the repair patches in an exact colour match. The coating keeps heavy rain out while reflecting sunlight.
We cover the Costa del Sol
Exterior repairs cover detached villas across the entire coastal region.
An inquiry about roof and wall repair carries no obligation.
Response time: 24 hoursSatisfaction guarantee
Your questions, answered
Should facade repairs happen before or after exterior cleaning? +
Wall repairs and new roof tiles come before any facade and render cleaning or painting. High water pressure can push straight into open cracks and harm the brickwork. Sealing the surface first stops water from getting inside the home during the wash.
How does repair work affect neighbouring properties and shared boundaries? +
Taking off loose render creates some dust and tapping noise. We lay heavy sheets over driveways and nearby patios to catch falling bits. The work happens during daytime hours to avoid disturbing the neighbors.
How can you tell if render repair is done properly? +
A thorough facade repair feels firm without hollow echoes when lightly tapped. The surface aligns flush with the existing wall plane, showing no jagged ridges or uneven patches. Breathable mortar blends smoothly into surrounding textures.
What noise and dust levels occur during exterior wall repairs? +
Removing hollow render and cutting damaged tiles produces dust and sharp chipping sounds. Dust sheets capture debris at the base of the wall, and workspaces are swept daily. Noise stops completely once mortar application and tile setting begin.
Does the time of year affect roof and facade repairs? +
Repairs can run all year during dry days. Mid-summer work takes place in the morning so new render sets before the sun dries it out. Swapping cracked roof tiles before autumn rains stops leaks inside the house.
What happens if a repair does not meet expectations? +
Our satisfaction guarantee applies to every repair. If any detail is not right, reporting it brings a return visit from us to inspect and correct the issue promptly.